The Custom 30 uses the same preamp as the custom 40, but with a different output stage and lower plate voltages. It uses 4 6V6 output tubes for 30 watts, and can also run a single pair of EL34's for 50 watts without re-biasing. With the 6V6 tubes, the amp starts to clip at a much lower volume setting. Tweed tones, British tones and 60's clean tones can be dialed in easily.

---

Tubes:	4 X 6V6, 3 X ECC83, 1 X 5AR4 (can run single pair of EL34's)
Controls:	Preamp Vol, Master Vol, Treble, Midrange, Bass, Presence
Speaker outputs:	4, 8-8, 16 ohm.

---

Coverings in black, green on black, red, and purple Levant.

Modifications (foot switchable gain boost, preamp DC heater supplies and 1/4 -
1/2 power switching) are available for most amps.